At the occasion of the release of the Military Ti C36 which is some kind of superb hybrid: 80% Sal Glesser and 20% Chris Reeve, I have digged in my archives to find and reedit the loooooong review we made with Fred Perrin back in the 20th century (2nd march 1999). Anyway here it is with some quotes:
“Yes, the Military is big. Yes, it has a large heavy blade (though the knife as a total is lightweight for its size). But if you are looking for a knife that has the absolute best blade size/weight ratio that fits into the slimmest, lightest handle, this is the knife for you. Not to mention that because of it’s weight forward massive blade, it is probably the quickest and easiest manual knife to open there is. Also with its great flat ground thin edged blade, it is one of the handiest do-it-all knives you’ll ever use. It is not the knife for everyone, but what knife is? Almost 99% of the complaints you’ll ever hear about the Military (and 100% about sticking open), can be blamed on the first generation batch. These new improved versions are FAR superior. Do not buy a Military if you are looking for a collectible. Do not buy it just because a whole lot of us forumites like it a lot. Buy it because you’ll USE IT! And therein lies its beauty.”
-GENE, MEMBER OF THE BLADE FORUMS-
“Gene – Thank you. The Military Model was designed to be the ‘state of the art’ production folder of the time. We believe the 2nd generation version is that. Every one of the many parts in this model was examined and refined. We listen to all of the comments (good and some negative), but our own constant testing enforces our beliefs. We believe that nested liners are more evolved and stronger than separate liners. And more expensive to produce. (Ask for favorite custom maker how much more they will charge you to nest their ‘full liner’ just inside the scale like Spyderco’s Military). ‘Form’ in addition to the ‘pins’ create rigidity. It may be possible to ‘white knuckle’ a lock release, but this hasn’t happened to our knowledge. Being able to easily close the knife after hard user with gloves on was a major consideration. Any of you that have had a folder lock open and not be able to close it? It’s like a chain saw that won’t stop . . . what do you do with it? The new ‘SecurLok’ that Frank Centofante invented is scheduled to be added to the Military Model sometime in ’99. This would eliminate the fear of accidental lock release.
The Military Model was not designed as a fighting knife, nor was it designed for suit and tie carry. It was designed to be the most dependable cutting tool accessory a soldier might need while in the ‘bush.’ The handle is a little larger to afford the dual grip potential. Design is always a great discussion, because there are so many points of view, e.g., blades are for cutting, handles are for holding. A 2″ blade specifically designed for controlled cutting loses its ability to control if the handle is only just long enough to cover the blade. Nothing to purchase on. A scalpel is a good example of this. What is the knife designed to do? To look at? By all means, balance the sizes to appearance. To use? Tougher problem here. Just one designer’s point of view. I have avoided responding to this thread, as it was my design in question and this was a comparison type question. It would be expected that I would be biased.”
-SAL GLESSER, CEO OF SPYDERCO INC. MODERATOR OF THE SPYDERCO FORUM AND INVENTOR-
“The designer is Sal. He has a teen-age son. He designed the Military Model with the idea that if his son had to go to war and could carry only one knife, the Military Model is what he would want him to carry. Sal’s came up with this model because he wanted a ‘survival,’ ‘camp,’ ‘all-around’ knife that could perform any task in the field, from cutting branches and small trees, field dressing animals, to personal survival.”
-JOYCE LAITURI, DIRECTOR OF MARKETING AND PUBLIC RELATION AT GOLDEN COLORADO-
“I remember years ago when Jeff Randall of Adventure Training fame used to take various knives and survival equipment deep into the Jungles of Peru for extensive testing. This period was before Jeff had developed his RAT series of knives. He and his mates beat the snot out stuff, and then posted their evaluations on the Adventure web site. Sal gave him a CMP-440V Military to test; that folder was absolutely abused. There were photos of the knife being used to process vegetation for shelter……skin, slice and dice cayman for the stew pot….and even split firewood. The Military received a Triple A+ endorsement from all who used it; the lock never failed ! Unfortunately , once Randall developed his own line of knives, the test results were eventually removed. Too bad…it made for some good reading. Just as an aside, after having read Randall’s review of the Spyderco Military I promptly went out and bought a Military and then signed myself up for a seven day canoe expedition down the lower canyons of the Rio Grande, south of Big Bend National Park….intending to put my Military through it’s paces……and perhaps skin a hippo or two, was I. After all was said and done I think the most challenging task the knife performed was to snag the remaining pickle from the bottom of the jar during a lunch stop. Despite the fact that the canoe trip fell slightly short of a National Geographic expedition to the remote wilds of my youthful imagination……I had a fine time, and am very pleased to own one, tough, folding knife ! “
Given what’s available in current production the G-10 Military is a hell of a bargain and more than adequate for daily duty……and SV30 takes a great edge, and will hold it, even with lots of use, for at least a week. What’s it take to put a good edge back on a SV30 Millie with a Sharpmaker ??….a few minutes ? Heck, put a convex edge on that knife and you can strop it on the back of a piece of cardboard and bring the edge “back” even faster.
How important is it that your knife blade go a month until you sharpen it ?
If titanium is to your liking, the Ti Millie is a work of art !
Spyderco Forum Registered Member
“The millie’s only a big knife for the first week, then all your other knives are suddenly too small.
Rogue Simulant on BritishBlades Forum
And now the 1999 Fred Perrin/Nemo review:
This picture show the C36 Military and Nemo’s grand grandfather personnal knife used during Wold War I. This knife has been in real close combat (and you can notice how many time it was used by counting the marks on the handle). The Military is somewhere the grand grandson of that old folding knife, used and abused long time before all that “tactical” hype starts to exist. (Also notice, the full flat ground blade has been so many times resharpen, it is almost now half of his lenght!)
WWI was the first war with enough media coverage for people to discover how much a knife can be a useful tool for the soldiers.
“Thank to Joyce, we have received from Golden three Militaries for us to test and abuse: one full serrated and two plain edge in CPM440V. (Now known as CPMS60V. And the current version is CPM S30V…)
In our own humble opinion, we prefer a plain edge, because we know how to get a really sharp edge on it and we believe a serrated edge is the best option for people who need to cut ropes, plastic, fibrous materials or even rubber everyday…. The Plain Edge is the real Polyvalent Edge. The serrated edge, even though it is really impressive for its nasty cuts and slashes, is not the best cutter in a tactical situation for us. (In fact, we always had a better result with a plain edge!) In a word, a serrated edge is perfect for people who don’t like to sharpen their blade. So we can also advise you to carry always two Militaries in your pocket: one serrated in the left and one plain in the right one!” (Some may consider it a joke, but Fred used to be carrying a plain edge Military as well as a serrated Ladybug II!)
“The Military Model is really feather weight and thank to that, for the first time since a really long time – since 5 inch Cold Steel Voyager was released – we are carrying a big folder.) It’s the first time we could really trust a linerlock. This is one of the rare linerlocks that survived our really hard tests. It’s easy to see the hollow ground side where the liner comes to lock against the blade. Michael Walker, the father of the “Liner Lock,” is involved directly in the improvements noticed in Military.
So, like we said, Military is one of the rare big folder that gives enough confidence for us to carry on a daily basis. Now that we handle our C36, we really enjoy them. Understand this simple facts: it’s light, big, and reliable.
Why do we love this knife now? Because it’s a beautiful knife ? We have seen so many so called “tactical” craps. How serious the design of the Military Model appears immediately at first sight. No useless cosmetics: this is the M16 of knives !
But first let’s have a look at the handle: it’s a “real” handle! This is enough rare to be noticed: its handle is the handle of a tool destined to be used. That extra inch gives a real grip and you cannot lose control of your knife, unless you are clumsy “like a seal” ! Have you ever seen many knives with this kind of long ergonomic handle? The Rescue (from Spyderco) and the Voyager (from Cold Steel) also have one.
On the other side of the handle where is the blade: there is some kind of false guard integrated to the blade where you can apply direct pressures on it without putting excessive force on the handle and the lock. Even the large clip mounted on the handle is not messing with your grip. The G10 handle is really strong. You can trust us about that point. We have used G-10 since 1993. We have even made blades of G-10, even G-10 balisongs and stealth folders. It is really a strong and light material. We have hammered it without any problem. This combination of Fiber Glass and Epoxy is almost made to be bullet proof !
The liner lock, as we said, is excellent (despite our efforts to break it and make it fail). It’s easy to think that most folders are only made for light chores and are not designed for combat, chopping, or other hard chores. Folders are often considered as “city knives,” but the Millie has such a reliable lock that you can use it for hard chores without any pity for it.
Now about the C36 blade. We would like to advise Spyderco to stop drilling these big holes in their blades! Their hole is too small for our fingers to get in and too big to be soap bubble proof. But we noticed that we can use the hole to open the blade really fast. It’s a pure joy! When your knife rests in your pocket, you just have to pick it up by the hole in the blade and with a flick of the wrist, the knife is open and ready. The C36 is really easy to open just with a flick of the wrist!!!
No need for any “torsion spring.” Why do we need the automatic? Sal would say.
The CPM440V (i.e., the C36 blade material in 1999) is top notch in cutting ability and edge holding with the good heat treatment applied in Golden. The Full Flat Ground of the blade has high performance in blade geometry. It gives a really good penetration power and is the most polyvalent grind available! No more no less! This was the main difference between the Military Model and the old Police Model. The excellent Calypso also has this kind of grind. Just watch the old knives from the 19th century Thiers (France) or Sheffield (England). This V flat grind is nothing new; our ancestors have shown us what grinds are all about! Let’s stop believing that we have invented anything new in cutlery. The new “news” in cutlery are often only rediscoveries and “complemental combinations” of old systems. (The clip is 4 centuries old; the serrated edge is also very old; and the Hole also; but Spyderco’s genius move was to combine all these features together.)
That C36 was designed as a utility knife and this is a proof of real wisdom from Sal. But let’s not forget that a good tool is often an excellent weapon also. Dirty fighting is only another chore after all. The Military is also a good self-defense knife, because it opens really quickly, thanks to the hole and the smooth action. And, as we said, the lock is a rock! The long handle improves your reach, and the slashing ability of this tool is outstanding! You can thrust it, because you trust it. A thrust with a folder is not our favorite move. In this case, we prefer the hammer grip with the edge UP, because the lock is far from our fingers. Just try to hold Military with the edge up, and you will feel a formidable thrusting weapon in your hand.
If you don’t have possibility to carry a fixed blade or a balisong, the C36 puts its reliability in the balance. It’s so easy to forget where you clipped your Military, when you cannot forget where you try to hide a fixed blade with the same reach as the Military.
Cutting power? We are not aficionados of so called “super steel.” The type of steel is not the most important part of the blade. The geometry and the heat treatment are two much more important points. But we think CPM440V is a really good steel, because we have always been satisfied with this steel in our own made knives and other makers knives. Piercing bullet proof vests and performing multiple rope cutting tests were part of our tests and CPM440V is excellent! The only thing is not to have it harden to high rockwell number. RC56 for CPM440 is even not necessary. In mechanics, soft can often erode hard. Also when a knife is too hard, the edge will be hard to re-sharpen, too much of a hassle for not such results. When it is around HC61, it becomes painfull to re-sharpen and is really prone to break. With CPM440V, we have a really good alternative! It cuts a very very very long time and is easy to re-sharpen, because we don’t always have a back stand to re-sharpen our knives (after one entire week of using Military, one minute with a ceramic rod was enough to give it its razor edge back!). There is no way we don’t love CPM440V, and it is no surprise that excellent knives like the Panama Fighters by Sean MacWilliams made of this steel are so good. The only problem with CPM440V is the high difficulty and cost of heat treatment (at least in Europe). Sometimes, we would really like to borrow Sal Glesser’s heat treatment machinary for a moment. :-) CPM440V, like VG-10, is a very important stainless steel, but we don’t believe in mystic super steels! We already tested some crappy CPM440V knives, even some designed by famous designers! Spyderco knows how to heat treat their blades, and their designs are good in the first place.
Something really important: Military is not a NEW knife. It’s a knife in perpetual metamorphosis since 1996.
1. Stainless steel torx head assembly screws
2. Double steel posts in back spacer
3. Concave tang ramp
4. Redesigned choil
5. Improved dyeing procedure for the G-10
6. Nested stop pin threaded and screwed from both sides
7. Eccentric pivot pin
8. Redefined serration angle
9. Stronger clip
10. Polished linerlock
11. Harder linerlock material
You see now it’s harder, stronger, improved, redesigned and eccentric ! It shows us that, despite the fame of Spyderco products gained through the years, Sal Glesser and his Spyderwomen/Spydermen are always listening to critics and are searching to improve their products. This is so rare !
The 1999 Military is now a second generation knife. It acquired this kind of mega-reliability by standing on the giant shoulders of its 1996 fathers. You can trust people who want to improve things and believe in Quality before Quantity. A good idea is like a good wine: it gets better and better with age. Some people would like a smaller Military. Why not? But we feel it is not necessary. Spyderco offers so many great smaller designs (check C61, C62, and C57!!!).
We think for a tour of duty, the C36 Military Model has a perfect size.
I have just received my HEST and I’m going to write a review in 2010…
Sometime in 2010 ! Not in january.
It’s obvious. How could I write any “opening the parcel” review on a tool which is made to live with ? I need to use it but also I need to edc it.
To EDC a knife means to get in osmosis with the design and start to wear and tear my pockets with only one knife. And osmosis got a long incubation for such a polyvalent tool. Especially when you know you gonna like it !
First impressions out of the box ?
Wow this knife is/feels/looks solid.
This is a thick and sharp knife. Very sharp thanks to its geometry. It cuts bread better than many of my thinner blades. The HEST is deadly serious in its purpose: to be reliable even if you missuse it. There is no “gadget” feel in it. A good friend, reliable if you take care of it.
Wow. The handle fits like a glove. The hand is encapsuled between the choil and the prybar. What’s more could I say ? This knife is screaming to be used. Not only used hard but also it’s screaming to be used cleverly. By giving you holes in the handle, skeleton option, pry bar, the conceptors of that knife are also opening a door for opportunities. As one of the rare multitools with no mobile parts the HEST looks like a great addition to your SAK… Hey you can open a beer with it and even the pry bar can be used as a flat screwdriver.
The beauty is in the eye of the beholder… but the HEST is very sexy. It’s a knife with a very strong character, and it’s a confidence builder. You need to desserve it, as, the clever you are, the better the Hest will perform.
It’s very rare to find a short FB which is designed as a good EDC companion for adventures. It’s could be adventures in your backyard, in the woods, or in exotic far away places.
You feel like it’s made to carried with you all the time and to develop a “special” bond with you. So I guess it’s going to be my main FB for 2010.
The RC3 and the IZULA will be used by friends in Italy and France but the Riddle of The Hest need to be answered in a very personnal matter.
The only thing I could say now is: I love it. I love the way it feels in the hand !
It’s thick, sharp,looks great and it’s a Rat Cutlery Knife made by Rowen ! Wow !
This is mine stripped from its black coating. My Lemon HEST !
I got the chance to own a Rat Cutlery RC-3 plain edge. I love that little rascal and since I got it, I use it hard and a lot !
Jeff Randall and Mike Perrin (owners of Rat Adventure Training and Ratcutlery) have created an outstanding and affordable tool, one of the best of their Ratcutlery line of knives which contains a lot of great tools ! (Also I think I will review their excellent book “Adventure In The Third World” very soon!)
Jeff Randall & Mike Perrin (Photo (c) J. Randall)
These two gentlemen have been designing knives for more than a decade. Their designs is inspired by their own needs. Their land of testing is the peruvian rain forest, near Iquitos, the biggest city on the amazon where they teach how to survive in the jungle. When they are not teaching to Special Forces or help a film crew to cross the forest, these two modern “Tintins”, half journalists, hall witnesses of the world, enjoy the uncharted zone, pushing always the envelop of their curiosity as they’re answering the call of adventure. As a knife is an important part of your gear (with a machette), they’ve been using a lot of steel and even review them in Tactical Knives and now in SWAT Magazine.
(Also I think I will review their excellent book “Adventure In The Third World” very soon!)
Seems like the RC-3 is their favorite design to date. And this is true this little knife
If you favor lil’ fixed blade over folder you should really enjoyed the RC3 in everyday situations. First, the ergonomy should fit your need perfectly. The choil (just under where RC-3 is written on the blade) is very handy for precises works and micarta just feels great even with wet hands. There is no hotspot. there is even some kind of sensual feeling whil holding this blade. The square section makes it easy to index the blade in the dark or without to look at it.
I love where the balance is (right on the logo enprinted on the micarta handle), which give a lot of life to the blade but this is really a personnal preference.
The full flat grind blade is thin (which is an exploit for US Designs these days who tends to favor thick knives…) and it gives a great power to the cutting. The slicing is easy and deep. I also like the belly: turning the knife into a great slicer with a drop point which caracterize it as a classic hunting skinner knife immediatly.
1095 is a great steel. A good old steel to be precise. I always been able to get it super sharp. (My nightmare is S90V, D2 or BG42 which are “a bear to sharp” without diamonds.) 1095 is a classic of carbon steels which is a great steel when it’s well heattreated BUT it can rust faster than an angry chimp will throw feces on you.
With the coating used on the blade, there is no concern. That coating is very very scratch resistant and it gives a positive grip when you work holding your knife by the naked blade. Very often I sand the coating of my knives but here, I don’ plan to do it as I enjoy it as it is !
What is the outstanding is the great heat treatment by Rowen, Idaho, on all RAT Cutlery knives, at 57HRC the strenght of the blade gives you a lot of confidence in that little knife.
The sheath system give you dozen of alternative ways to carry your blade. My favorite is in the front pocket or in my bag.
It’s easy to forget it and very handy to use. Notice how I use the cord stopper as a plug to retain the sheath in uppper position in my pocket.
A push of your thumb on the thermoformed plastic and the blade is free.
So if you are looking for a little fixed blade which can take a punishment and carry on cutting.
I have used it for batoning, kitchen duty, at the sea (the edge get som pitting but I was able to strop it on my leather belt…). On very hard plastic (the coating can be noisy when you need to saw in plastic…) on wood (the cut gives some kind of soft patina to the wood, like M2 does…) so whittling is easy (even if a sak is helpful for delicate carving). Chopping is limited to making some notches with a flick of your wrist. It’s very easy to convex the grind and get better performances but sa far as I am concern, the edge on mine (40°) is enough for clean cuts even on hard wood.
The RC3 is a great alternative to a folder. Its lock will never fail you!
And it’s a real workhorse covered by a great warranty, lifetime, no question, unconditionnal guarranty.
(This RC-3 is used everyday by a friend of Jeff Randall who live in Peru.
Jeff wanted to exchange it for a new but his friend always refused.) (Photo (c) J. Randall)
I notice also this knife could be a great “self defense tool” with its glass breaking pommel and its positive grip and not all knives designed as tools are good also for that other darker territory. No surprise this knife is a huge success in the USA and is favor by Police Officers and Special Forces. It even got the outstanding rate of 4,77/5,00 at NTOA review ! Bushcrafters of the world seems also to love that short knife for its polyvalence, design and quality.
Mike Perrin and his RC-3 (Photo (c) J. Randall)
You can even use it as a light chopper for notching branches. This is a knife you can take with you while camping, with his friendly antisheeple size, it won’t raise any eyebrow when you will start to use it to whittle some sticks or clean your game unless you do that in the middle of the city !
So if you are looking for a solid, sharp, reliable knife which can be used as EDC or packed for any trip. The RC-3 has proven all those qualities in those last three years worldwide from ranchers to bushcrafters to US Marshalls to adventurers.